Pulp molding egg tray machine Egg tray production line Paper forming machine
Main equipment of egg tray machine:
1. The pulping system includes pulper; mixer pump, water pump, sewage pump, and refiner
2. Molding system: The 4x8 model molding machine has a total of 8 molding templates and a transfer template, equipped with a vacuum automatic drainage system, a mold washing device and an automatic product heating system.
3. Drying system: Traditional brick cutting drying system, each section has an independent air distribution device and can be independently controlled.
Metal drying: The drying production line dries the formed pulp molded products and uses fans to extract the evaporated moisture from the products. The metal drying lines include single-layer drying lines and multi-layer drying lines.
4. Collecting and packaging system: The dried egg trays, wine trays, etc. are automatically counted and the product height is sorted to facilitate storage and transportation.
The raw materials of the egg tray machine are waste paper mainly including waste cardboard, waste carton paper, waste white edge paper, paper mill tail pulp waste, etc., which come from a wide range of sources and are easy to collect. The output is 1000 pieces-6000 pieces/hour.
The required operating personnel are 4 people per shift: 1 person in the pulping area, 1 person in the molding area, 1 person in the trolley drying product, and 1 person in the packaging area.
Advantage:
1. The machine is extruded by the cold pressing die during the suction process, and the moisture in the product will be squeezed out and sucked away by the vacuum during extrusion, which reduces the load of the drying room and saves energy.
2. The egg tray machine adopts split transmission design. That is to say, the transfer, roller and cold pressing parts are completed by 3 servo motors. It can be turned on individually or jointly. Since the transfer is individually controlled, the transfer speed can be greatly increased and the output of a single machine can be greatly increased.
3. The drum transmission and cold pressing of the pulp forming machine use servo motors and precision reducers to complete precise position control, which is not easy to block the network and improves the utilization rate of the machine.
4. The egg tray machine has a high degree of automation and a high safety factor. Once the machine fails, the machine will automatically stop.
Specification:
|
|
Pulp Molding Egg Tray Machine Egg Tray Production Line Paper Forming Machine Images
|
